Quick Answer
A tone generator plays a pure audio signal at a frequency you choose, from 20 Hz to 20 kHz — the full range of human hearing. This free online tone generator produces sine, square, triangle, and sawtooth waves, runs timed tones or continuous playback, and sweeps between two frequencies for speaker and hearing tests. Every sound is synthesized locally in your browser, fades in and out to protect your ears, and nothing is uploaded or tracked.
How It Works
Set the volume slider low (around 25%) before playing — every tone ramps in over 50 ms, but high volume on headphones can still startle
Pick a frequency: drag the logarithmic slider across 20 Hz – 20 kHz, type an exact value, or use a preset like 440 Hz or the 1 kHz test tone
Choose a waveform — sine for pure test tones, or square, triangle, and sawtooth for harmonic-rich signals
Select Continuous or a fixed duration (1–30 s), then press Play; the readout shows the exact frequency and nearest note
For speaker and hearing checks, switch to Frequency sweep, set the range and duration, and listen as it glides from start to end
Key Facts
- Full 20 Hz – 20 kHz range via logarithmic slider or exact numeric input
- Four waveforms: sine, square, triangle, and sawtooth
- Continuous playback or fixed durations of 1, 3, 5, 10, or 30 seconds
- Frequency sweep mode with exponential (musical) or linear curves between any two frequencies
- Live frequency readout with nearest musical note and cents offset (A4 = 440 Hz)
- Click-free 50 ms fade-in and 80 ms fade-out on every start and stop, with capped output to protect hearing
- 100% client-side WebAudio synthesis — nothing is uploaded, works offline after load
- Free and unlimited, no sign-up or install required
Frequently Asked Questions
What is a tone generator used for?
Tone generators are used to test speakers and headphones (find buzzes, rattles, and dropouts), check your hearing range, calibrate audio equipment against a known reference like 1 kHz, measure room acoustics, and provide precise frequencies for science experiments and music practice. A slow frequency sweep across 20 Hz – 20 kHz is the quickest way to reveal where a sound system or room has problems.
What is the highest frequency humans can hear?
Young children can perceive tones up to about 20 kHz, but hearing in the high range declines with age: most adults top out between 12 and 16 kHz, and by senior age often below 10 kHz. Use a sweep from 8 kHz upward at low volume to find your own limit — loud high-frequency tones can be uncomfortable and damaging, so keep the volume modest.
Why does a logarithmic frequency slider matter?
Pitch perception is logarithmic: each octave doubles the frequency. 100–200 Hz and 1–2 kHz are the same musical distance, even though the second spans 1,000 Hz. A logarithmic slider gives you equal precision per octave across the whole 20 Hz – 20 kHz range, so bass frequencies are as easy to dial in as treble ones. For exact values, type the frequency into the numeric field instead.
What is the difference between sine, square, triangle, and sawtooth waves?
A sine wave is a single pure frequency with no harmonics — the cleanest test signal. A square wave contains the fundamental plus odd harmonics (3×, 5×, 7×…) and sounds buzzy. A triangle wave also has odd harmonics but they fall off faster, so it sounds mellower. A sawtooth wave contains both odd and even harmonics and sounds bright and full — it is the classic starting point for analog synth strings and brass.
How does a frequency sweep test speakers?
Play an exponential sweep from 20 Hz to 20 kHz and listen for changes: rattles or buzzing usually mean cabinet or room resonance, sudden dropouts reveal dead spots in a driver or crossover, and harsh peaks show where a speaker or room over-emphasizes a band. An exponential sweep rises by equal musical steps per second, so it sounds like a smooth, even glide — exactly how our ears perceive pitch.
Is this tone generator free and private?
Yes — completely free with no sign-up. All sound is synthesized by your browser using the Web Audio API: there are no recordings and no uploads — the tone is generated locally on your device. The page keeps working offline once loaded. Start at low volume, especially on headphones, because sustained loud tones can damage hearing quickly.